SCULPFUN S9 комплект сопла с воздушной поддержкой для высокоскоростной работы

Features:
1. Official SCULPFUN S9 Air Assist Nozzle: This is a standard S9 air assist nozzle developed by SCULPFUN, it is an all-metal construction and is ideal for the S9 laser. The installation is very simple and takes only a few minutes.
2. High-speed air nozzle: Like the S10 nozzle, it is a high-speed air supply kit with an advanced hydromechanical design. Only an air pump with a volume of 30 liters/min can provide a high air flow rate of 13.5 m/s.
3. Faster and cleaner cutting: The S9 air assist system will improve the cutting ability of the S9 laser. Cut plywood and MDF boards 2-3 times faster, and the cutting surfaces will become cleaner without smoke formation.
4. Good tightness: The S9 nozzle is equipped with an O-ring, and the air from the air pump will not leak through the gap. In addition, the seal prevents dust from entering, which will increase the service life of the S9 lens.
5. Accessories set: The package includes SCULPFUN S9 air-powered nozzles, air ducts, O-rings and other necessary accessories for installation. Except for the air pump, you don't need to buy any other accessories, you can directly use and upgrade the S9 machine.

Specifications:
Product Model: SCULPFUN S9 Air Assist Kit
Interface size:
Outer diameter of auxiliary copper air supply pipe: 8mm/ 0.31 inch
Inner diameter of air pipe: 7.5mm /0.29 inch
Package weight: 0.185 kg
Package Size: 19 * 15 * 8 See/7.48*5.9*3.15 "

Recommendations for choosing an air pump: It is recommended to choose an air pump with a capacity of ≥30 l/min, and the diameter of the air pump interface is preferably about 8 mm/ 0.31 inches.


Waybill:
1 x Set of S9 Nozzles
1 x Air Duct
1 x Set of Tools
1 x User Manual